The Cart Mule Dumpster Mover - Motorizing your Garbage bin with a Battery powered Cart Mule Tug.
Make the Cart Mule Dumpster mover the safe alternative to manually moving the garbage bin or waste container at your location.
Take to heavy work load out of moving Heavy Trash containers.
When the Dumpster Cart Mule mover is attached to the Waste Management bin you will have better controllability when traveling down or up a slight decline.
This is especially useful when pedestrians or moving a bin in high traffic congested areas of a parking lot.
With a Cart Mule dumpster mover,
the work of moving a dumpster can now be done with just one person easily. and that one person does not have to worry about strain or overexertion. Our Cart Mule dumpster mover is engineered to assist in transferring a dumpster from an underground parking lot to the street level, transport a waste bin from a compactor room to a trash pick up site, or move a dumpster on an incline through snow, slush, or ice. A lot of situations are on flat surfaces, but workers using our Cart Mule trash bin mover may need to pull/push a dumpster or other large waste container up an incline. Safety is essential in all situations where workers need to transport heavy carts and dumpster, but even more so if there is an incline involved. Employees that have to manually push a heavy trash or recycling container up large inclines to the street may become injured due to overexertion, strains, or slips and falls. You can prevent this when you invest in a Cart Mule battery powered waste mover. Inquire about our larger or smaller Dumpster Cart Mule movers. Our Cart Mule product line come standard with a powerful 24 volt DC to 48 volt DC motor that can pull, push, and maneuver dumpsters from 200 lbs to 50,000 lbs.
Easy Hook up and Go with the motorized Cart Mule Dumpster Mover!
Duty Cycle: 8hr
Recharge from full discharge: 8 to 10 hr
Max Load: 8,000lbs
(inquire about our larger dumpster movers for loads up to 50,000lbs)
Motorized Electric Tractor Trailer Mover Tug - heavy duty lift dolly
Model Number: HD7500 TTM-24 / HD7500 TTM
w/o battery pack and lift device running time
Lift Capability 20,000 Pull/Push Capability 40,000 lbs.
The Motorized Electric Tractor trailer mover tug is designed to maneuver Trailers into tight positions effortlessly and economically.
The HD7500 Powered Trailer Mover is engineered for moving king pin covered and equipment trailers, as well as campers up to 40,000 lbs. The Powered Trailer Mover has a 20,000 lbs power actuator lift kit designed to lift up king pin, ball, or pintle hitch type of trailer connections. The most common environment requiring a Trailer HD7500 Trailer Mover are semi tractor-trailer manufactures, RV and camper dealerships, military bases, and vehicle maintenance locations at government repairs centers. The Powered Trailer Mover where constant movement of king pin wheeled equipment in areas typically too confined for conventional fork trucks or large tow vehicles. The Trailer Movers power, size, and price tag make it a more effective and affordable alternative or risking a possible injury to employees the equipment.
This unit is designed to work a 24 hr. a day shift. The Cart Mule® 24 is ideal for facilities that do not close and in need of equipment 24hrs a day. The Cart Mule® 24 is always ready when you need it. Equipped with 2 battery packs and an optional lift dolly and charging table (recommended)
MECHANICAL SPECIFICATIONS:
DIMENSIONS LENGTH...72.2" WIDTH… 50.0" HEIGHT…34.3" (Less handle and tow bar)
TIRES (2) FRONT.......16"DIA. (4) REAR.......18" DIA. PNEUMATIC
WEIGHT 2,050 lbs.
GROUND CLEARANCE 5.0" TIRES MOUNTED ON SIDES FOR LOWEST CG (center of Gravity) TO ELIMINATE TIP OVER OF UNIT.
WORKING LOAD MAX 40,000 LBS AT 1.5 MPH CAN BE PUSHED OR PULLED IN NORMAL CONDITIONS. THE MAX LBS MAY BE LESS DEPENDING ON SURFACE CONDITIONS. OPTIONAL DIFFERENT SPEED SETTINGS DONE THROUGH GEARING AVAILABLE.
DUTY CYCLE 4 TO 5 HOURS UNDER NORMAL CONDITIONS. SURFACE GRADE AND TEMPERATURE MAY AFFECT DAILY OPERATING TIME.
BRAKING: BRAKES TYPES; 1.) DOUBLE DYNAMIC BRAKING FROM MOTOR 2.) DOUBLE STATIC GEAR REDUCTION BRAKING, DOUBLE AUTOMATIC BRAKING SINGLE START TYPE LOCKING FORWARD & BACK DRIVE GEAR REDUCER
SYSTEM DRIVER: MOTORS 2 U.L., CSA, ISO. WITH THERMAL OVERLOAD PROTECTION.
REAR WHEEL DRIVES TWO INDEPENDENT DRIVE SYSTEMS. COMPLETE DRIVE SYSTEM FULLY SHIELDED FROM ENVIRONMENTAL HAZARDS
OPERATING SPECIFICATIONS:
MANUAL OPERATION: SPEED FACTORY SET; FORWARD DIRECTION ; REVERSE DIRECTION FOUR BUTTON
WEATHER RESISTANT KEY PAD SECURED TO HANDLE ASSEMBLY. FORWARD SPEED BUTTON #1= 1 MPH,
FORWARD BUTTON #2= 2 MPH FORWARD BUTTON #3=3 MPH, REVERSE BUTTON #1= 1MPH
